HERA TOWEL WARMER

Name: HERA TOWEL WARMER
Brand: LEDCO
SKU: LCTW-HEBK12
Price: 437.97 CAD
Availability: InStock

SKU: LCTW-HEBK12

Brand: LEDCO

Step out of the shower into a warm, dry towel every single morning. The HERA TOWEL WARMER (SKU LCTW-HEBK12) is the kind of small upgrade people notice the second they walk into a bathroom — a sleek black electric towel warmer that doubles as a heated towel rack, a towel dryer and a quiet piece of wall sculpture. If you have been searching for a black towel warmer, a heated towel bar or an electric towel warmer for the bathroom, this compact wall-mounted model delivers the hotel feeling without taking over the room. It works just as well in a family bathroom as it does in a spa, a gym, a salon or a boutique hotel suite.

Designed for high performance and impeccable looks, the HERA measures 26.8" x 19.3" x 2.44" and comes with robust colour-matched metal brackets, so the hardware disappears into the finish instead of fighting with it. It runs on 120V at 400 watts and puts out 258 BTU of gentle, steady heat, with a maximum surface temperature between 90 and 110 F depending on model and ambient temperature — warm enough to dry towels thoroughly, never hot enough to worry about. The hardwired connection (120 VAC) eliminates visible wires for a clean, built-in look, and the unit is ETL tested and compliant. It is also offered in a range of designer finishes, so you can match the rest of your bathroom hardware.

This is a natural fit for primary ensuites, guest bathrooms, basement bathrooms, cottages, condos, pool houses, spas, physio clinics and short-term rentals — anywhere damp towels linger in our long Canadian winters. Contractors love that the hardwired feed can be roughed in during renovation, and homeowners love the everyday comfort and the help it gives against bathroom humidity. If you need a taller or wider model, look at the Eos towel warmer, the Clip 47" towel warmer - black or the Atlas towel warmer. Add the HERA to your project and make warm towels part of the routine.

Design and construction
The HERA is built around a simple idea: a towel warmer should look intentional, not industrial. Its slim wall-mounted profile projects just 2.44" from the wall, so it fits beside a vanity, behind a door or in the tight run of wall you find in a powder room or a condo bathroom. The black finish is clean and contemporary, and the unit ships with robust color-matched metal brackets so the mounting hardware blends in rather than standing out. The same design is available in a range of designer finishes if you are coordinating with faucets, shower trim or cabinet pulls elsewhere in the room.

Heat performance
With 400 watts on a 120V supply, the HERA delivers 258 BTU of radiant warmth. The maximum surface temperature sits between 90 and 110 F, depending on model and ambient temperature — the sweet spot for drying a bath sheet, a housecoat or a swimsuit without scorching fabric or making the bar uncomfortable to touch. Because the heat is constant and low, it also helps keep towels fresher between washes and takes the clammy edge off a bathroom in January.

Technical specifications
SKU: LCTW-HEBK12
Dimensions: 26.8" x 19.3" x 2.44"
Height: 68 cm / 26.8"
Width: 49 cm / 19.3"
Heat output: 258 BTU
Voltage: 120V
Power: 400 watts
Connection: hardwired (120 VAC)
Max surface temperature: 90 - 110 F, depending on model and ambient temperature
Certification: ETL tested and compliant
Mounting: wall-mounted with color-matched metal brackets

Electrical and installation
The HERA uses a hardwired connection at 120 VAC, which eliminates visible wires and gives you that flush, built-in look no plug-in model can match. Plan the feed during rough-in, position the box behind the unit's footprint, and confirm the exact mounting height and clearances on the spec sheet before you close the walls — many installers set the warmer within easy reach of the shower or tub. All electrical work should be done by a qualified electrician and in accordance with the Canadian Electrical Code and your local requirements. Because the unit is ETL tested and compliant, it is straightforward to specify on residential and commercial jobs alike.

Applications and documentation
Think primary ensuites and guest baths, cottages and chalets where towels never seem to dry, pool and spa change rooms, gyms, estheticians' and physio rooms, hotel suites and Airbnb units where guests notice the details. In a laundry or mudroom it quietly dries mitts, hats and delicates through the winter. Complete a multi-bathroom project by pairing the HERA with the Artemis towel warmer, the Clip 59" towel warmer or the Eos towel warmer. The full LCTW-HEBK12 spec sheet, with dimensioned drawings and electrical data, is available in the Documentation tab for your electrician or designer.

Technical Files