ACCESSORY STW2 WALL WASHER STRIP LIGHTS - ALUMINUM PROFILE - 1 METER

Name: ACCESSORY STW2 WALL WASHER STRIP LIGHTS - ALUMINUM PROFILE - 1 METER
Brand: CANOLIGHT
SKU: CL-STW2-ALU
Price: 12.97 CAD
Availability: InStock

SKU: CL-STW2-ALU

Brand: CANOLIGHT

Make a wall the star of the room with a clean, even wash of light, mounted in the CANOLIGHT aluminum profile for STW2 wall washer strip lights. Model CL-STW2-ALU is a one-metre LED aluminum profile designed as the matching housing for the CANOLIGHT STW2 wall washer strip. It keeps the strip straight, secure and properly aimed so the light sweeps smoothly over brick, stone, wood or plaster. Often searched as an aluminum extrusion or an extruded aluminum channel for LED strip lighting, it is the component that gives a wall washer strip the look and performance of an architectural fixture.

The profile comes in a convenient 1 metre length that is easy to handle on a ladder, easy to line up end to end along long walls and easy to shorten on site with a fine-tooth blade. A rigid aluminum housing is what keeps a wall wash even: the strip cannot twist or sag, so the beam lands consistently on the surface along the whole run. The result is a smooth gradient of light instead of patchy bright spots, with a crisp, continuous line at the mounting edge and easy access to the strip for future maintenance.

Choose it to light feature walls in living rooms and entrance halls, textured walls in restaurants and bars, merchandise walls in shops, hotel corridors, office lobbies and building façades anywhere in Canada. It is designed for the CANOLIGHT STW2 wall washer strip, so plan it with that strip and order one length per metre of run. Check the spec sheet in the Documentation tab for dimensions and mounting details, and let your walls shine.

A dedicated profile for the STW2 strip
Wall washing is one of the most effective ways to make an interior feel bright, open and refined: instead of lighting the floor, you light the vertical surfaces people actually look at. The CANOLIGHT CL-STW2-ALU aluminum profile is the housing made for the STW2 wall washer strip light. It holds the strip in a rigid, straight channel so the light is aimed consistently and the wash stays even along the full length of the wall.

Aluminum construction
Made of aluminum and supplied in 1 metre lengths, the profile is light enough to install overhead and stiff enough to stay straight across long spans. Cut it with a non-ferrous metal blade, file the edges smooth and mount it. Lengths can be installed end to end for continuous lines along corridors, façades and long feature walls. The exact dimensions and mounting accessories are listed in the spec sheet available in the Documentation tab, so review it when planning recesses or surface mounting.

Installation guidance
Choose the mounting position according to the effect you want: at floor level to graze the wall upward, at the ceiling to wash downward, or in a soffit, cove or ledge for a hidden source. Mark a level line along the full run, then fasten each profile length to a solid surface with fasteners suited to the substrate, keeping the joints tight and aligned. Place the STW2 strip in the housing, then follow the strip's installation instructions for power and connections. All line-voltage and driver wiring should be carried out according to local electrical code by a qualified electrician.

Applications
Pair this LED aluminum profile with the STW2 strip to showcase natural stone and exposed brick, wood slat walls, textured plaster, artwork and murals, retail merchandise walls, hotel and condo corridors, restaurant dining rooms, office reception walls and exterior façades. At home, it adds drama to fireplace walls, stairwells, headboard walls and tall living rooms, and it is a favourite of designers who want lighting that is felt rather than seen.

Compatibility and ordering
As its name indicates, this profile is an accessory for the CANOLIGHT STW2 wall washer strip lights. Confirm your strip model before ordering, total the length of your run and plan one profile per metre, adding a little extra for cuts. Full details are in the spec sheet in the Documentation tab.

Technical Files