8" SLIMLED PRO - ROUND - HIGH OUTPUT RECESSED DOWNLIGHT - SLMPRO8-27K-WH

Name: 8" SLIMLED PRO - ROUND - HIGH OUTPUT RECESSED DOWNLIGHT - SLMPRO8-27K-WH
Brand: LITELINE
SKU: SLMPRO8-27K-WH
Price: 208.97 CAD
Availability: InStock

SKU: SLMPRO8-27K-WH

Brand: LITELINE

Bright rooms start with the right fixture, and the 8" SLIMLED PRO round is one of the brightest slim recessed downlights you can put in a ceiling. Known by all sorts of names — slim panel light, LED pot light, wafer light, ultra-thin recessed lighting — this Liteline SLIMLEDPRO fixture needs no recessed housing at all: the junction box and driver go up into the ceiling, the fixture snaps in, and you get a clean, flush white trim that disappears into the drywall. It's the go-to answer for kitchen downlights, basements, hallways, retail floors and any renovation where the ceiling cavity is tight or crowded with joists, ducts and plumbing.

The numbers explain why the "Pro" name is earned. This 8" round model delivers 2585 lumens at 33W on 120V, in a warm 2700°K colour temperature that flatters wood, warm paint tones and skin — the cozy, lamp-like light people want in living rooms and bedrooms. The body is only 1-11/16" thick, with the driver and heat sink included, and it fires light through a wide 120° beam angle for smooth, even coverage with fewer fixtures. It is dimmable, I.C. rated for direct contact with insulation, approved for wet locations, plenum rated with FT6 wire, and backed by Liteline's Lifetime Warranty — a rare promise in recessed lighting.

Wet location approval and the I.C. rating make this one a favourite for Canadian homes and businesses: insulated attic ceilings, covered porches and soffits, bathrooms and showers, basement renos, stairwells, garages, plus offices, clinics, boutiques and restaurant dining rooms that want high output without a bulky can. Mix finishes across a project — the same 8" high output downlight is offered in black and brushed nickel at the same 2700°K — or step up in colour temperature with the 3000°K white version. Order SLMPRO8-27K-WH and light the whole room properly, the first time.

Built slim, built to perform
The SLIMLEDPRO Series was engineered to outperform traditional LED recessed fixtures, and this 8" round model is the heavyweight of the family. At just 1-11/16" thick, the housing slips into ceilings where a standard can simply will not fit — shallow joist bays, concrete slabs with furring, finished basements, suspended ceilings. Because no recessed housing is required, installation is fast: the driver and heat sink are included, the integrated LED fixture is a sealed, maintenance-free assembly, and the whole thing is designed to be easy to install yourself. The white finish keeps the trim quiet against painted drywall or plaster.

Light quality and output
With 2585 lumens drawn from only 33W, this is a super high output downlight that can carry a large room, a tall ceiling or a commercial space with far fewer points of light than older recessed cans. The 2700°K warm white colour temperature gives that soft, incandescent-like glow — ideal where comfort matters more than clinical brightness — and the 120° beam angle spreads light wall to wall so you avoid scalloping and dark corners. It is fully dimmable, so you can drop the level for evenings, dining or presentations.

Technical specifications
Model: SLMPRO8-27K-WH
Brand: Liteline
Series: SLIMLEDPRO
Size / shape: 8" Round
Wattage: 33W
Lumens: 2585 lumens
Colour temperature: 2700°K
Voltage: 120V
Thickness: 1-11/16"
Beam angle: 120°
Finish: White
Dimming: Dimmable
Rating: I.C. rated, wet location approved, plenum rated FT6 wire
Included: Driver and heat sink
Warranty: Lifetime Warranty

Electrical, installation and where it fits
Wire it to a standard 120V circuit; the included driver and FT6 plenum rated wire mean the fixture is ready for both residential and commercial ceiling cavities. The I.C. rating allows direct contact with insulation, so you can bury it in an attic ceiling without keeping clearance, and wet location approval opens up bathrooms, showers, covered porches, soffits and car ports. For dimming, connect it to a dimmer suited to LED loads and keep the same model across a circuit for consistent behaviour. Because the fixture ships as a complete integrated LED unit, there is no lamp to source later and no separate trim to buy.

Applications, matching products and documentation
Picture it over a kitchen island and work counters, down a long corridor in a condo tower, in a dental clinic, a boutique fitting area, an office lobby, a workshop or a basement home theatre where you still want warm light. Keep one colour temperature and change the look with finish: the same 8" high output downlight comes in black or brushed nickel, or move to a cooler light with the 3500°K white model and the 4000°K brushed nickel model for work areas. The full technical PDF (SLMPRO8-27K-WH Spec Sheet) is in the Documentation tab for your electrician, inspector or lighting layout.

Technical Files