10MM DOUBLE SIDED 3M ACRYLIC TAPE

Name: 10MM DOUBLE SIDED 3M ACRYLIC TAPE
Brand: LED MONTREAL
SKU: 2ST3M
Price: 6.97 CAD
Availability: InStock

SKU: 2ST3M

Brand: LED MONTREAL

Some of the best lighting installs fail for the silliest reason: the channel won't stay up. That's exactly the headache this 10MM Double Sided 3M Acrylic Tape solves. Known on jobsites as double-sided 3M acrylic foam tape, mounting tape, or simply "the sticky tape for LED profiles", it's the fast, screw-free way to fix aluminum LED profiles and channels — and other lighting accessories — onto almost any clean surface. If you're planning led strip lighting under cabinets, along a staircase, around a soffit or behind a headboard, this roll is the quiet hero that keeps everything exactly where you put it, with no drill, no anchors and no patched holes.

The roll measures 10 mm wide and 3 meters long, a width that matches the base of most slim and mid-size extrusions, so the tape stays hidden and the channel sits flat. Its padded acrylic foam construction makes it super strong and water resistant, which is why it's a real alternative to screws or clips for permanent work. It bonds well to metal, glass, plastic and anodized aluminum, and because it's an electrical insulator rather than a heat conductor, it's meant for securing profiles and channels — not for sticking bare LED strips that need to shed their heat through the extrusion. Prep is simple: clean the surface first, water alone works for a quick job, but a 50:50 to 70:30 isopropyl alcohol and water solution with a lint-free cloth gives the strongest, longest-lasting grip.

From a Montréal condo kitchen to a retail counter in Calgary, this tape earns its place in the toolbox. Use it for under-cabinet and toe-kick channels, closet and pantry lighting, cove and ceiling runs, display cases, garage workbenches, signage, boat docks, patios and covered porches where humidity and temperature swings are part of Canadian life. Contractors love it for tenant-improvement work where drilling into finished surfaces isn't an option, and homeowners love it because the job takes minutes. Grab SKU 2ST3M with your next profile order and mount it once, properly.

What it is and how it's built
This is a double-sided acrylic foam tape from LED MONTREAL, supplied in a 10 mm wide, 3 meter long roll. The padded foam carrier is what separates it from a thin film tape: it compensates for small surface irregularities, spreads the load along the whole length of an extrusion and grips both faces at once. The result is a bond that behaves like a mechanical fastener while staying completely invisible once the aluminum LED channel is pressed into place. It is described as super strong and water resistant, which is why it suits permanent and outdoor-exposed installations rather than temporary staging.

Technical specifications
SKU: 2ST3M
Brand: LED MONTREAL
Type: Double sided 3M acrylic foam tape, padded
Width: 10 mm
Length: 3 meters
Water resistance: Water resistant
Thermal behaviour: Electrical insulator, not a heat conductor
Bonding surfaces: Metal, glass, plastic, anodized aluminum
Recommended use: Mounting aluminum LED profiles/channels and lighting accessories
Applications: Residential and commercial projects, indoor and outdoor

Surface prep and installation
Adhesion is 90% preparation. Start by cleaning the mounting surface: water alone is acceptable for a quick clean-up, but for best results wipe the surface with a 50:50 to 70:30 isopropyl alcohol and water solution using a lint-free cloth, then let it dry completely. Unroll the tape along the back of the profile, press it down firmly over its full length, remove the liner, position the channel and apply steady pressure end to end so the foam compresses evenly against the substrate. Because the bond is designed to be permanent, dry-fit your LED profile and confirm the run, the corners and the location of the driver connection before you peel the liner. On long runs, cut several sections rather than fighting one continuous strip — it makes alignment far easier on ceilings and soffits.

Compatibility and what it should not be used for
The 10 mm width is sized for the flat back of slim and mid-size extrusions, so the tape stays fully concealed under the channel. It also works for other lighting accessories that need to be fixed to metal, glass, plastic or anodized aluminum: mounting clips, small junction housings, sensor bodies, sign faces. One important limit: this tape acts as an electrical insulator rather than a heat conductor, so it should not be used to stick LED strip tape directly to a surface when that strip relies on the aluminum extrusion to dissipate heat. Mount the channel with the tape, then seat the strip inside the channel the way it was designed to be installed — the LEDs run cooler and last longer.

Where it shines on real projects
Think under-cabinet and shelf lighting in kitchens, backlit bathroom mirrors and vanity runs, closet and pantry strips, cove lighting in living rooms, stair nosings, retail display cases, reception desks, restaurant bars, office workstations and workshop benches. Outdoors it handles pergolas, covered patios, railings, docks and signage, where its water resistant build is a real advantage through a Canadian season. It's also the go-to solution for rental units, condos and commercial spaces where drilling into tile, glass, stone or finished millwork simply isn't allowed. No documents are listed for this item; the product details above cover everything needed to specify and install it.