PC COVER FOR CL-IND-UFO1-240W-3CCT-BL

Name: PC COVER FOR CL-IND-UFO1-240W-3CCT-BL
Brand: CANOLIGHT
SKU: CL-ACC-UFO1-PC-COVER240
Price: 43.97 CAD
Availability: InStock

SKU: CL-ACC-UFO1-PC COVER240

Brand: CANOLIGHT

Keep your high bay working like new with the right accessory: the PC cover for the CL-IND-UFO1-240W-3CCT-BL UFO LED high bay. Sold under SKU CL-ACC-UFO1-PC COVER240, this dedicated polycarbonate cover — also called a PC lens, high bay lens cover or UFO high bay protective cover — is made for one fixture and one fixture only: the Canolight 240W UFO LED high bay. If you already run these round UFO LED high bay fixtures in a shop, a warehouse or a barn, this is the part that shields the optics and the LED modules from everything the room throws at them.

Polycarbonate is the material contractors trust for protective lenses because it takes an impact far better than a bare optical face, it stays light on the fixture, and it keeps its light transmission over the years. That last point matters on a high-output luminaire like the 240W UFO high bay: clear optics mean the lumens you paid for actually reach the floor instead of getting lost in a haze of dust and film. The cover is engineered to secure directly onto the CL-IND-UFO1-240W-3CCT-BL housing, so it does not interfere with the fixture's thermal management or its electrical side. No drilling, no cutting, no custom fitting — it goes on clean and comes off clean when it is time to wipe it down.

This accessory earns its keep in warehouses, distribution centres, manufacturing plants, sports facilities and agricultural buildings — the kind of Canadian spaces where airborne dust, humidity swings, vibration and the occasional bump from a forklift mast are simply part of the day. It fits the LED UFO highbay 160W/200W/240W 3CCT and no other model, so ordering is foolproof: one cover per fixture, whether you need a single replacement or enough to outfit a full bay-by-bay project. Add the matched PC cover to your UFO high bay order and protect the investment from day one.

Built for one fixture, and it shows
The CL-ACC-UFO1-PC COVER240 is not a universal lens you have to shim, trim or tape into place. It is a dedicated polycarbonate cover shaped for the housing of the Canolight CL-IND-UFO1-240W-3CCT-BL UFO LED high bay. That exclusivity is the whole point: the profile follows the fixture's round body, the cover seats where the manufacturer intended it to seat, and nothing about the luminaire's heat dissipation or wiring is affected. When an accessory is designed alongside the fixture, you avoid the classic field problems — a lens that rattles loose, a gap that collects dust, or a makeshift cover that traps heat against the driver.

Why polycarbonate instead of glass or acrylic
Polycarbonate is one of the most reliable materials in the lighting industry for protective covers and lenses, and there are three good reasons for that. First, impact resistance: it absorbs knocks far better than the alternatives, which matters where pallet jacks, ladders and mast lifts move under the fixtures. Second, weight: it adds very little load to the luminaire and to the mounting point. Third, longevity of the optic itself — polycarbonate maintains excellent light transmission over time, so the 240W UFO high bay keeps delivering the brightness it was specified for instead of dimming behind a grimy, scratched face.

Installation and maintenance
Installation is tool-friendly. The cover snaps or secures directly onto the CL-IND-UFO1-240W-3CCT-BL housing, with no drilling, no cutting and no custom fitting required. For an electrical contractor, that means the accessory can be fitted on the ground before the fixture goes up, or added later during a retrofit without dismounting the whole luminaire — a real saving in labour on a floor full of high bays. Maintenance is just as simple: because the cover takes the dust and the airborne film instead of the optical face, cleaning becomes a matter of wiping a smooth polycarbonate surface rather than servicing the fixture's optics. Facility managers who keep a few spares on the shelf can swap a scuffed cover in minutes and keep every aisle looking consistent.

Technical specifications
SKU: CL-ACC-UFO1-PC COVER240
Brand: CANOLIGHT
Type: protective polycarbonate (PC) cover, accessory only
Material: polycarbonate
Compatibility: CL-IND-UFO1-240W-3CCT-BL UFO LED high bay (exclusive fit)
Installation: secures directly onto the fixture housing, no drilling or cutting

Where it belongs, and what to order with it
Think of every space where dust, debris and humidity are constant: warehouses and distribution centres, manufacturing plants and machine shops, sports facilities and arenas, agricultural buildings, barns and equipment sheds. In those rooms, the optical face of a high bay is the first thing to suffer, and a clouded lens quietly steals light long before anyone files a complaint. The obvious companion product is the fixture itself, the LED UFO highbay AC120-347V, 160W/200W/240W adjustable, 3CCT 3500K/4000K/5000K — three selectable colour temperatures and three selectable wattages on a fixture rated at 140 lm/W, which makes the matched cover an easy line item to add to the same order. Plan on one cover per luminaire. A technical PDF spec sheet for the CL-ACC-UFO1-PC COVER240 is available in the Documentation tab of this page for your submittals and project files.

Technical Files