PAR20 TRIM - ADJUSTABLE SQUARE - LCTRIM-4-S-BS

Name: PAR20 TRIM - ADJUSTABLE SQUARE - LCTRIM-4-S-BS
Brand: LEDCO
SKU: LCTRIM-4-S-BS
Price: 14.97 CAD
Availability: InStock

SKU: LCTRIM-4-S-BS

Brand: LEDCO

Give your recessed lighting a sharp, architectural edge with the PAR20 trim – adjustable square, model LCTRIM-4-S-BS. Also called a square downlight trim, pot light trim, recessed ceiling trim or gimbal trim, this is the visible finishing ring that snaps into your 4-inch ceiling housing and holds a PAR20 lamp. The square aperture gives you those crisp lines designers love, while the adjustable head lets you aim the beam exactly where you want it — on a backsplash, a brick wall, a painting or a display shelf — instead of washing the floor with light you don't need.

This trim is built for PAR20 LED bulbs (spot led PAR20), so you choose the wattage, the beam angle and the colour temperature that suit the room and simply swap the lamp later if your needs change. The brushed steel finish pairs beautifully with stainless appliances, modern hardware and grey or white ceilings, and the square shape lines up neatly with tile joints, cabinets and drywall bulkheads. Because it is a trim, all the electrical work stays in the housing you already own: no driver to hide, no rewiring, no surprises. The adjustable gimbal stays where you set it, so once the room is dialled in, the aim holds. Swapping a dated round trim for this square one is one of the fastest visual upgrades you can make to a ceiling — same holes, brand-new look.

It's a natural fit for kitchens, hallways, condo living rooms, basements, bedrooms and home offices, as well as boutiques, salons, cafés, galleries, clinics and small offices where commercial LED ceiling lights need to look intentional. Renovating a Québec or Ontario home with 4-inch cans already in the ceiling? This trim drops into that existing opening. It belongs to the same PAR20 family as the PAR20 trim adjustable square in black, the PAR20 trim adjustable square in chrome and the round version, the PAR20 trim adjustable round, so you can mix finishes room by room and keep one consistent look throughout the project. Order the quantity you need and finish that ceiling properly.

Sold separately
To complete the installation, add:
Housing: LCHOUSPAR20-4IC

What this trim is
The LCTRIM-4-S-BS is a PAR20 recessed trim with a square face and an adjustable (gimbal) head, finished in brushed steel. It is the decorative and functional interface between your ceiling opening and your PAR20 lamp: it covers the cut edge of the drywall, conceals the housing hardware, and holds the bulb at the angle you choose. Sold as a component, not a complete fixture — you supply the compatible 4-inch housing and the PAR20 LED bulb, which gives you full control over brightness, beam spread and colour temperature.

Aiming and light quality
The adjustable head is what sets this trim apart from a fixed baffle. Tilt it toward a feature wall for grazing light, point a row of them at kitchen cabinets for even counter coverage, or angle them onto artwork so the frame is lit and the sofa is not. Because the light source is a standard PAR20 lamp, you can fine-tune the effect after installation: a narrow spot for accenting, a wider flood for general ceiling lighting, a warmer lamp in a bedroom, a neutral one in a kitchen or office. If a room's use changes, you change the bulb, not the ceiling. The square aperture also reads as more contemporary than a round trim and aligns cleanly with rectangular ceilings, islands and cabinet runs.

Installation notes
Trim replacement is one of the friendliest jobs in renovation. Cut power at the panel, remove the old trim (usually held by torsion springs or friction clips), insert the PAR20 lamp, and push the new trim up until it sits flush against the ceiling. Nothing is soldered, nothing is wired at the trim itself — all connections live in the housing above. Confirm that your existing housing accepts a 4-inch PAR20 trim and that the retention hardware matches before ordering. For consistent results across a room, install every trim with the square edges aligned to the same reference line, then aim the heads once the furniture is in place.

Where it works
Homeowners use these for LED kitchen ceiling lights, open-concept living rooms, hallways, staircases, basement rec rooms and home offices. Contractors specify them in condo renovations where the ceiling plane is low and a shallow, clean trim matters. On the commercial side, they suit boutiques lighting merchandise walls, cafés highlighting a menu board, clinics, salons, and small offices that want commercial LED ceiling lights with a deliberate architectural look. For wet or damp locations such as showers, choose a shower-rated trim from the same family instead — for example the PAR20 trim round/shower in brushed steel.

Matching the rest of the project
Finish consistency makes a renovation look professional. This brushed steel square trim coordinates with the square adjustable trim in black and the square adjustable trim in chrome when you want a different accent in an adjoining room, and with the round adjustable PAR20 trim if part of the home already uses round openings. No spec sheet or IES file is published for this trim; if you need dimensional confirmation for an unusual housing, measure your existing opening before ordering.