PAR20 TRIM – ROUND/SHOWER (BRUSHED STEEL)

PAR20 TRIM – ROUND/SHOWER (BRUSHED STEEL)

SKU: LCTRIM-4-RSH-BS

Brand: LEDCO

Give your recessed lights a finished, polished look — and give your shower the safe, glare-free light it deserves. This PAR20 trim in a round shower style with a brushed steel finish is the visible ring that sits flush against your ceiling and frames a PAR20 recessed light. People search for it as a pot light trim, a recessed light trim ring, a shower trim, a round LED shower light finish or simply a "spot LED PAR20" cover — they all point to the same part: the piece that hides the housing edge, directs the beam downward and turns a rough-in hole into a clean, intentional detail. It is made for residential and commercial projects alike, from a bathroom refresh to a full floor of new recessed lighting.

The round/shower design closes the opening with a smooth, downward-facing profile instead of an open adjustable eyeball, so the light is aimed straight down where you need it and the ceiling stays visually calm. The brushed steel finish brings a soft, satin metallic tone that pairs beautifully with brushed nickel faucets, stainless appliances and modern hardware, and it hides fingerprints and water spots far better than high-gloss finishes. Because it is sized for the PAR20 lamp format, you keep full freedom on the bulb itself: choose the wattage, colour temperature and beam angle you prefer and swap it later without ever touching the trim. SKU LCTRIM-4-RSH-BS.

This trim shines in bathrooms and shower stalls, above tubs, in entryways, hallways, kitchens, basements, condo renovations, clinics, salons, hotel rooms and retail change rooms — anywhere a round LED light needs to look tidy overhead. It pairs with the matching black and chrome versions of the same round/shower trim, and with the adjustable round and square PAR20 trims when a project mixes fixed downlights and aimable accents: see the PAR20 trim round/shower (black), the PAR20 trim round/shower (chrome), the PAR20 trim adjustable round and the PAR20 trim adjustable square. Order the trims you need and finish the ceiling the way you pictured it.

Sold separately
To complete the installation, add:
Housing: LCHOUSPAR20-4IC

13.97$


What this trim is and what it does
A recessed light is really two parts: the housing hidden above the ceiling and the trim you actually see. This round/shower trim is the visible half. It snaps into a PAR20 recessed housing, covers the cut edge of the drywall opening, blocks light from spilling up into the ceiling cavity and gives the fixture its final personality. The round/shower style keeps the aperture closed and the lamp recessed behind a flat, downward-facing face — the classic look people want over a shower, a tub or a hallway where an open, tilting eyeball would look busy or catch the eye at the wrong angle.

Finish and light quality
The brushed steel finish gives a satin, low-sheen metallic surface: warm enough to feel soft, neutral enough to disappear into a white or grey ceiling. It coordinates naturally with brushed nickel plumbing fixtures, stainless steel appliances and satin cabinet hardware, which is why designers reach for it in kitchens and bathrooms. Visually, because the trim recesses the lamp and frames the beam, you get a cleaner pool of light and less direct view of the source when you walk under it — an easy win for comfort in a small bathroom where ceilings are low and every fixture is close to eye level.

Technical specifications
SKU: LCTRIM-4-RSH-BS
Product type: recessed ceiling trim
Lamp format: PAR20
Style: round / shower
Finish: brushed steel
Category: ceiling housing trims
Intended use: residential and commercial projects

Installation and compatibility
Installation is the friendly part of the job: with the power off, install your PAR20 lamp, then engage the trim's retaining springs or clips into the housing and push the trim up until it sits flush and square against the ceiling. No wiring is required at the trim itself, which means you can change the look of a whole room in an afternoon without calling anyone back to the panel. Always confirm that your housing accepts a PAR20 trim and, for a shower or tub location, that the housing and lamp assembly are rated for that damp or wet location by the manufacturer of the housing — the trim is the finishing piece, not the rating. Since the lamp is separate, you keep control over brightness and colour temperature, and future maintenance is as simple as popping the trim down and swapping the bulb.

Applications, matching pieces and documentation
Think shower stalls and bathrooms first, then hallways, entries, walk-in closets, laundry rooms, basements, condo and townhouse renovations, and commercial spaces such as clinics, spas, salons, hotel guest rooms, offices and small retail fitting rooms. Canadian renovators often run a full ceiling in one trim style and then break the rhythm with a few aimable units over art, a shower niche or a display: for that, combine this trim with the PAR20 trim adjustable round or the PAR20 trim adjustable square, or stay in the same family and pick the black and chrome versions of this round/shower trim for rooms with different hardware. No spec sheet or IES file is attached to this page; if your project requires submittal paperwork, plan it around the housing and lamp you select, and use the product photos here to confirm the finish and profile before you order.
Top