Built to be seen
Decorative fixtures are unforgiving: the lamp is on display, so it has to look as good as it performs. The LUMIFARO CTC LED bulb uses a clear bulb colour, which gives that crisp, jewel-like sparkle through open shades, cages and glass chandelier arms. Its compact body — 95 mm tall by 35 mm in diameter — was sized for decorative sockets, so it tucks neatly into candle covers and narrow shades instead of poking out awkwardly. Every one of these lamps is covered by a 2 year warranty.
Light quality you can trust
At 500 lumens from just 5.5 watts, this LED bulb gives you real, usable brightness without the heat and waste of old incandescent decorative lamps. The CRI of 80 keeps colours honest — important above a dining table, in a bathroom vanity or in a retail display. You choose your mood with 2700K for a warm, golden residential feel, or 4000K for a cleaner neutral white in kitchens, offices and work areas. The photometric data shows an average beam angle (50%) of 325.5°, meaning the light wraps almost completely around the lamp for even, glare-free ambiance rather than a narrow spot.
Technical specifications
SKU: LEDCTC55W27K
Brand: LUMIFARO
Wattage: 5.5 watts
Lumens: 500 lumens
Voltage: 120 volts
Colour temperature: 2700K / 4000K
CRI: 80
Bulb colour: Clear
Dimensions: 95 mm height, 35 mm diameter
Average beam angle (50%): 325.5°
Dimming: Dimmable
Warranty: 2 years
Electrical and dimming notes
The bulb runs on standard 120 volts, so there's no driver, no transformer and no rewiring — you simply swap the old lamp for this one. It is dimmable and works with most dimmers. Because dimmers are generally rated for a maximum of 150 watts with LED bulbs, the manufacturer strongly recommends staying under 80% of that capacity to prevent flicker when the dimmer is at its lowest setting. In practice, that means counting your bulbs per circuit before loading a large chandelier, and keeping a little headroom. The included photometric table also shows how illumination falls off with distance — from 21.79 Lx at 1 m down to 0.2179 Lx at 10 m — handy when you're planning fixture heights over a stairwell or a two-storey entry.
Where it works and what's in the documents
Use it in dining room chandeliers, bedroom sconces, hallway lanterns, bathroom vanity bars and pendant clusters at home; in cafés, salons, boutique hotels, reception areas and restaurant dining rooms on the commercial side. Because it sips only 5.5 watts, a twelve-arm fixture that once burned hundreds of watts now runs on a fraction of that, which matters in Canadian homes where lights stay on for long winter evenings. Full photometric curves, the luminous intensity distribution diagram, dimensions and the complete technical specifications are all in the spec sheet available in the Documentation tab of this page — download it for your submittals, renovation plans or electrician.
