INDOOR, 24V, 2110 CHIP, HIGH OUTPUT TAPE, 4M (13'), 4.4W/FT (14.4W/M), 350 LEDS/M, CRI 90, DIM, 35K

Name: INDOOR, 24V, 2110 CHIP, HIGH OUTPUT TAPE, 4M (13'), 4.4W/FT (14.4W/M), 350 LEDS/M, CRI 90, DIM, 35K
Brand: LUMENSTARLED
SKU: LS-FLI-6A-24-350-3K
Price: 189.97 CAD
Availability: InStock

SKU: LS-FLI-6A-24-350-3K

Brand: LUMENSTARLED

Some rooms only come alive when the light is hidden — and that's exactly what this LED tape light was made for. The LumenstarLED 2110 chip high-output tape, sold as SKU LS-FLI-6A-24-350-3K, is a 24V indoor LED strip light (also called tape lighting, LED ribbon or flexible strip) that packs 350 LEDs per metre for a smooth, dot-free line of light. Tuck it into a cove, a tray ceiling, a staircase nosing, under kitchen cabinets, behind millwork or inside a display case, and the fixture disappears while the glow stays.

This is a true high-output tape: 4.4W/ft (14.4W/M) delivering 1470 lumens per metre (448/FT), with a wide 120° beam that fills a channel evenly instead of throwing hot spots. The 3500K colour temperature sits in that flattering warm-neutral zone — crisper than 3000K, softer than 4000K — and a CRI >90 means reds, woods, fabrics and skin tones read true. It runs on 24V DC, which keeps brightness consistent from one end of the 4M (13') roll to the other, and it's fully dimmable for the exact mood you want. The tape measures W10 x H1.5mm (W25/64 x H1/16"), cuts every 7 LEDs — 13/16" (20mm), carries an IP 22 rating for protected indoor use, comes with a 12" (30cm) wire lead on both ends, double-sided 3M tape on the back, an operating range of -25~+60°C (-13~140°F), c UL us Listed certification and a 5-year warranty.

From a condo kitchen in Montréal to a hotel lobby, a restaurant bar front, a dental office reception or a home theatre riser, this tape does the quiet work that makes a space feel designed. Pair it with a 24V constant voltage LED driver sized with headroom above the full-roll load, an aluminum channel with diffuser, and a compatible PWM dimmer. Prefer a cozier or crisper look? The same tape is offered in 2700K high output tape and 4000K high output tape. Roll out your best lighting idea yet.

Built around the 2110 SMD chip
The 2110 emitter is compact but seriously capable, which is what lets LumenstarLED pack 350 LEDs per metre onto a strip only W10 x H1.5mm (W25/64 x H1/16") wide. That tight LED spacing is the secret to a continuous, dot-free line, especially behind a frosted diffuser or in a shallow cove where the tape sits close to the viewing surface. The flexible circuit carries a double-sided 3M tape backing on the reverse, so mounting into a channel, a reveal or the underside of a cabinet is a peel-and-press job. Cut increments land every 7 LEDs — 13/16" (20mm) — letting you tailor runs to real cabinet and ceiling dimensions instead of forcing the architecture to match the tape.

Light quality you can see
With 1470 lumens per metre (448/FT) and a 120° beam angle, this is a high-output LED tape light for jobs where standard-density strip simply looks weak: deep coves, tall tray ceilings, backlit panels and retail display cases. The CRI >90 rendering keeps colour honest — walnut stays walnut, merchandise looks like it does in daylight, and faces don't go grey. The 3500K colour temperature is the designer's middle ground: warm enough for lounges, hotel lobbies and dining rooms, clean enough for task zones like kitchen counters, vanities and workbenches.

Technical specifications
Product code: LS-FLI-6A-24-350
Voltage: 24V DC
Wattage: 4.4W/ft (14.4W/M)
Light output: 1470/M (448/FT)
Colour temperature: 3500K
CRI: >90
Beam degree: 120°
Dimmable: Yes
Cut increment: 7 LEDs - 13/16” (20mm)
Length: 4M (13')
IP rating: 22
Operating temperature: -25~+60°C (-13~140°F)
Wire length: 12” (30cm) wire lead on both ends
Dimensions (LxWxH): W10 x H1.5mm (W25/64 x H1/16")
Mounting: Double sided 3M tape on the back
Certifications: c UL us Listed
Warranty: 5-year

Wiring, dimming and installation
Feeding the tape at 24V DC rather than 12V cuts voltage drop over length, so the far end of the 4M (13') roll stays as bright as the first foot. Power it from a constant voltage 24V LED driver and size that driver with comfortable headroom over the connected load; leaving margin keeps the supply cool and the output steady. The 12" (30cm) wire lead on both ends is a practical touch — you can feed from either side, or run two sections in opposite directions from a single feed point. For dimming, use an LED-rated PWM dimming controller matched to the system amperage, and always mount long runs in an aluminum extrusion so heat wicks away. The IP 22 rating means dry, protected interior locations only: no exterior soffits, no direct contact with water, and no burying it in insulation.

Where it works and what's documented
Think cove and crown lighting in a living room, under-cabinet task light in a kitchen, staircase and handrail accents, backlit bathroom mirrors and floating vanities, shelf and display case lighting in a boutique, bar and banquette details in a restaurant, or reception desk reveals in an office. The c UL us Listed certification and 5-year warranty make it an easy specification for Canadian residential and commercial jobs alike. The full technical spec sheet for the 2110 LED Tape Light is available in the Documentation tab. If your project calls for a different mood, the same platform is offered as 2700K 2110 tape light and 4000K 2110 tape light, so you can keep one product family across a whole building.

Technical Files