INDOOR, 24V DC, RGB TAPE, 25M (82'), 7.2W/M (2.2W/FT), 30 LEDS/M, DIMMABLE, UL APPROVED, RGB

Name: INDOOR, 24V DC, RGB TAPE, 25M (82'), 7.2W/M (2.2W/FT), 30 LEDS/M, DIMMABLE, UL APPROVED, RGB
Brand: LUMENSTARLED
SKU: LS-FLI-5D-24-30-RGB
Price: 506.97 CAD
Availability: InStock

SKU: LS-FLI-5D-24-30-RGB

Brand: LUMENSTARLED

Turn any room into a colour show with the LumenstarLED RGB LED tape light — the flexible LED strip light installers reach for when a project needs colour, length and code-compliant peace of mind. Known by plenty of names — LED tape, tape lighting, LED ribbon, colour-changing strip — this 4-wire RGB flex tape runs on low-voltage 24V DC and comes on a generous 25M (82') roll, so long cove runs, under-cabinet lines and full-perimeter accents can be done with fewer joints and fewer power injection points. Paired with an RGB controller and a power supply (sold separately), it moves through millions of colours for entertainment rooms, retail displays, bars, restaurants, gaming setups and architectural coves. Model SKU: LS-FLI-5D-24-30-RGB.

The numbers back up the look. Each metre draws just 7.2W/M (2.2W/FT) and packs 30 LEDs per metre using proven 5050 chips, delivering 410 lumens per metre of saturated, even colour with a CRI greater than 90 — colour rendering that keeps merchandise, millwork and skin tones looking right when you run it in white-ish blends. Operating at 24V DC, it's a safer low-voltage system than line-voltage strip and it holds brightness better over long runs than 12V. The tape measures W10 x H2 mm, so it disappears into slim channels and tight reveals, and it's cuttable every 200 mm for a custom fit. A 3M adhesive backing on the reverse makes mounting fast on clean, dry surfaces. It is dimmable, UL approved for indoor use, and backed by a 5-year warranty.

This tape earns its keep in condo kitchens, basement theatres, staircases and tray ceilings, and just as easily in salons, cafés, retail fixtures, showrooms and hospitality lobbies across Canada. It is an indoor product, so keep it out of wet and damp locations — for patios and exterior features, choose the outdoor 24V DC RGB LED tape 10M instead. For denser colour on shorter runs, look at the indoor 24V RGB tape 5M with 60 LEDs/m, and if you also want tunable warm white, the LS-FLI-35B-24-60-RGBW adds a fifth wire. Plan your run, add a channel, and light it up.

Built to be hidden, made to be seen
This is a thin, flexible RGB LED strip built on a 5050 LED platform with 30 LEDs per metre and a slim W10 x H2 mm profile. The back carries 3M sticky tape, so mounting to a clean, dry, degreased surface takes seconds — no clips, no screws in most installs. The strip is cuttable at marked 200 mm increments, which lets you trim a 25M (82') roll into as many sections as a job needs without wasting the balance of the reel. Because it is a 4-wire RGB system (R, G, B and the DC+ common), every section you cut still needs the four conductors carried through to the controller.

Light quality and colour control
Output is 410 lumens per metre with a CRI greater than 90, which is high for a colour-changing tape and makes a real difference when the fixture is used for accent and display lighting rather than pure effect. The RGB mixing gives millions of colours from a single run, and the tape is dimmable when driven through a compatible RGB controller and dimming ecosystem, so you can set intensity and hue independently — deep saturated scenes for an event, soft low-level colour for everyday ambience.

Technical specifications
SKU: LS-FLI-5D-24-30-RGB
Brand: LumenstarLED
Type: RGB LED flex tape, 4 wire, indoor, with 3M sticky tape on the back
Voltage: 24V DC
Power: 7.2W/M (2.2W/FT)
LEDs per metre: 30
LED type: 5050
Lumens per metre: 410
CRI: >90
Roll length: 25M (82')
Cut increment: 200 mm
Dimensions: W10 x H2 mm
Colour: RGB
Dimmable: Yes
Approval: UL approved
Warranty: 5 years

Power, controls and compatible accessories
The tape needs a 24V DC LED power supply and an RGB controller, both sold separately. Size the supply from the load: multiply the installed length by 7.2W per metre, then leave headroom. The 24V driver range includes 30W, 60W, 96W, 150W and 320W models (LS-24V-30W-O-CV, LS-24V-60W-O-CV, LS-24V-96W-O-CV, LS-24V-150W-O-CV and LS-24V-320W-O-CV), all fed from 120V AC, with hardwire or plug wiring depending on the model. Joints and turns are handled by the solderless 4-wire RGB accessories: LS-RGB-SC1 connector, LS-RGB-SC2 lead, LS-RGB-SC3 jumper and LS-RGB-SC4 corner. For a finished look and better heat management, drop the tape into an aluminum channel rated for RGB strip, such as the LL11 standard 1M frosted channel.

Applications and documentation
Think cove and tray ceilings in a Vancouver or Montréal condo, toe-kick and under-cabinet colour in a kitchen renovation, backlit bar fronts and booth reveals in a restaurant, colour-changing display shelving in a boutique, or a home theatre ceiling that shifts from neutral to deep blue. On very long runs, feed from both ends or inject power to keep colour consistent. Need a 12V system on the same format? See the indoor 12V DC RGB tape 25M, or the short-roll 12V DC RGB tape 5M. The full technical PDF spec sheet for this model is in the Documentation tab, with the ordering guide, accessory list and driver table.

Technical Files