IND 12V, 3528 LED TAPE LIGHT, 5M (16.4'), 1.5W/FT (4.8W/M), 60 LEDS/M, CRI 90, DIMMABLE, WHITE 5000K, UL APPROVED

Name: IND 12V, 3528 LED TAPE LIGHT, 5M (16.4'), 1.5W/FT (4.8W/M), 60 LEDS/M, CRI 90, DIMMABLE, WHITE 5000K, UL APPROVED
Brand: LUMENSTARLED
SKU: LS-FLI-1B-12-60-5K
Price: 98.97 CAD
Availability: InStock

SKU: LS-FLI-1B-12-60-5K

Brand: LUMENSTARLED

Bright, clean, do-it-yourself light wherever a fixture just won't fit — that's what this LED tape light was made for. Known on job sites and in search bars as LED strip lights, tape lighting, ribbon light or LED band, the LUMENSTARLED indoor 3528 flexible tape (SKU LS-FLI-1B-12-60-5K) comes on a generous 5M (16.4') roll with 60 LEDs per metre — 300 little points of light that blend into one smooth, continuous line. Slip it under kitchen cabinets, inside a cove or crown moulding, along a staircase, behind a bathroom mirror, under a bar top, inside display cases and shelving, or in a garage workbench area. It's the fastest way to add layered, glare-free light to a renovation without opening a single ceiling.

The specs back up the look. It runs on 12V DC, draws only 4.8W/M (1.5W/FT) and puts out 475 lumens per metre (145/FT) — plenty of punch for task and accent work while sipping power. The 5000K daylight white keeps kitchens, workshops and retail displays crisp and awake, and a CRI >90 means skin tones, wood grain, fabrics and paint colours look the way they really are. The 120° beam spreads light evenly instead of dotting the surface, and yes, it's dimmable, so you can dial the mood from full work light down to a soft glow. The tape measures W8 x H1.5mm (W5/16 x L1/16") — thin enough to disappear — cuts every 2" (50mm), sticks down with the double-sided 3M tape already on the back, is c UL us Listed and carries a 5-year warranty.

Homeowners use it for under-cabinet and toe-kick lighting, cove ceilings, closets, pantries and basement bars. Contractors and small businesses reach for it in retail displays, jewellery and clothing boutiques, salons, art studios, reception desks and office millwork, where accurate colour sells the product. Because it's a low-voltage tape, it needs a 12V DC driver (power supply) sized for the run, and it dims with 12V PWM dimmers; use the matching 3528 solderless connectors for clean corners and jumps, and an aluminum channel if you want a finished, protected look. Planning your next kitchen, boutique or basement project? This 5M roll is a simple, certified starting point.

Built on a proven chip
The 3528 SMD is one of the most dependable formats in the business: compact, efficient and consistent from reel to reel. On this LUMENSTARLED indoor tape you get 60 LEDs per metre, which is the density that separates a clean, continuous line of light from a dotted one — across the full 5M (16.4') roll that's 300 diodes working together. The flexible circuit is only W8 x H1.5mm (W5/16 x L1/16"), so the LED tape light tucks into shallow millwork reveals, cabinet lips and cove details where a linear fixture simply won't go. Double-sided 3M tape is already applied on the back for a peel-and-stick install, and the tape can be cut every 2" (50mm) at the marked points to fit your exact run.

Light quality you can trust
Output is 475 lumens per metre (145 per foot) at 4.8W/M (1.5W/FT), a combination that gives you real working light without heat build-up in tight enclosures. The 5000K colour temperature reads as bright daylight white — the right choice for kitchens, workshops, garages, laundry rooms and retail displays where you need to see detail. The CRI >90 rating is the part specifiers care about: reds stay red, whites stay neutral, and merchandise, artwork and finishes look honest under the light. A 120° beam angle spreads the output wide so the illuminated surface stays even rather than scalloped.

Electrical and installation
This is a 12V DC low-voltage tape, so it needs a 12V DC LED driver (power supply) rated above the total load of your run — at 4.8W per metre, a full 5M roll draws roughly 24W, so size the supply with headroom. It is dimmable and works with 12V PWM dimming for smooth, flicker-free control from full brightness down to a soft accent level. Feed longer installations from both ends or split them into separate runs off the driver to keep brightness uniform, keep cut points on the marked copper pads, and use 3528-compatible solderless connectors for corners, jumps and extensions. Mounting is as simple as cleaning the surface, peeling the liner and pressing the tape home; an aluminum extrusion with a diffuser adds heat management and a finished architectural look.

Technical specifications
Product code: LS-FLI-1B-12-60-5K
Brand: LUMENSTARLED
Voltage: 12V DC
Wattage: 4.8W/M (1.5W/FT)
Light output: 475/M (145/FT)
Colour temperature: 5000K
CRI: >90
LED density: 60 LEDs/M
Beam degree: 120°
Dimmable: Yes
Cut increment: 2" (50mm)
Length: 5M (16.4')
Dimensions (WxH): W8 x H1.5mm (W5/16 x L1/16")
Mounting: Double-sided 3M tape on the back
Compatible solderless connectors: 3528
Certifications: c UL us Listed
Warranty: 5-year

Applications and documentation
Think under-cabinet counters in a kitchen renovation, cove lighting in a living room ceiling, stair nosing and hallway guidance, closet and pantry shelving, vanity and mirror backlighting, garage workbenches and basement bars. On the commercial side, it belongs in jewellery and clothing displays, bakery and deli cases, salon stations, reception millwork, art studios and offices — anywhere a Canadian contractor needs certified, high-CRI accent light that installs in an afternoon. Because it is a c UL us Listed product, it fits commercial specifications and inspection requirements across the country. This is an indoor tape, so keep it out of wet and damp locations. The full technical PDF (INDOOR 3528 FLEXIBLE LED TAPE) is available in the Documentation tab with the complete data table for cut points, dimensions and electrical values — worth printing before you start the layout.

Technical Files