T8 LED TUBE 8' 42W

T8 LED TUBE 8' 42W

SKU: LCT8-8F-120V-42W-50K

Brand: LEDCO

Time to retire those long, flickering fluorescent lamps? This 8' T8 LED tube is built to replace 8-foot fluorescent tubes in workshops, warehouses, garages, farm buildings and commercial spaces. Often searched as an 8 ft LED tube, a ballast bypass LED tube or an 8ft fluorescent tube replacement, it keeps your existing fixtures in service while giving them bright, modern LED light. It is the go-to upgrade for contractors, building managers and homeowners with a big garage or a shop, in residential and commercial projects alike.

This glass tube draws just 42 watts and produces 5,500 lumens, an efficacy of 130 lm/W, in a crisp 5000K white with a CRI of 83. Its frosted lens and 220° beam angle spread the light widely across benches, shelves and aisles. It is a Type B, double-ended ballast bypass tube that runs directly on AC, with FA8 end caps and a 120-277V, 50/60Hz input, plus a power factor above 0.9. Suitable for damp locations and operating from -20 °C to 40 °C, it offers a 50,000-hour lifespan and a 5-year warranty. Note that it is not dimmable.

Put it to work in 8-foot fixtures above workbenches, in warehouse aisles, storage rooms, barns, stables and loading areas. In Canada, where many garages and outbuildings are unheated, an operating range down to -20 °C makes this tube a practical choice for real winter conditions. Replacing fluorescent lamps with LED also means no more ballasts to replace and far less energy wasted. Lighting smaller fixtures too? See the 2' T8 LED tube. Choose the LCT8-8F-120V-42W-50K and bring your 8-foot fixtures back to full brightness.

44.97$


Construction built for 8-foot fixtures
The LCT8-8F-120V-42W-50K is an 8-foot T8 glass tube with a painted/coated glass body and a frosted lens that softens the light and hides the individual LEDs. Its length is 94 inches and it uses FA8 end caps, the single-pin base found on 8-foot tube fixtures. Glass gives the tube a familiar look and feel for anyone used to fluorescent lamps, while the LED technology inside delivers the performance of a modern light source. It is the logical replacement when your shop lights, warehouse strips or commercial fixtures still hold 8-foot fluorescent tubes.

Light quality and efficiency
With 5,500 lumens for 42 watts, the tube reaches a luminous efficacy of 130 lm/W, so you get more light for every watt consumed. The 5000K colour temperature gives a bright, daylight-style white that keeps workspaces alert and makes it easier to see details on a workbench or read labels on shelves. A CRI of 83 renders colours clearly for everyday tasks, and the 220° beam angle spreads the light wide, toward the work surface and the surroundings, for an even result in long aisles and large rooms.

Electrical and installation details
This is a Type B ballast bypass tube: it runs directly on AC, and the wiring is double-ended, as shown in the wiring diagram of the spec sheet. The ballast is removed or disconnected, and the fixture is rewired so that the tube receives power as the diagram indicates. The input voltage is 120-277V at 50/60Hz and the power factor is above 0.9. The tube is not dimmable, so connect it to a standard switch, not a dimmer. Have a qualified electrician do the conversion with the power off at the breaker, in compliance with the electrical code in force, and mark the converted fixture so no one reinstalls a fluorescent tube later. The spec sheet is available in the Documentation tab.

Durability for Canadian conditions
The tube is suitable for damp locations and operates from -20 °C to 40 °C, which covers unheated garages, workshops, barns and storage buildings through much of the Canadian winter. Its lifespan of 50,000 hours means years of use before any relamping, a major advantage for high fixtures that require a ladder or a lift, and it is backed by a 5-year warranty. For smaller fixtures in the same building, the 2' T8 LED tube completes the conversion.

Technical specifications
Wattage: 42 watts
Lumens: 5,500 lm
Luminous efficacy: 130 lm/W
Colour temperature: 5000K
CRI: 83
Beam angle: 220°
Input voltage: 120-277V, 50/60Hz
Power factor: above 0.9
Type: Type B, double-ended ballast bypass
End cap: FA8
Body / lens: painted/coated glass, frosted
Length: 94 inches
Dimmable: no
Damp location: yes
Operating temperature: -20 °C to 40 °C
Lifespan: 50,000 hours
Warranty: 5 years
Product code: LCT8-8F-120V-42W-50K
Top