Built for everyday dutyThe Pure Vision A19 S3 keeps the familiar A19 silhouette and E26 medium screw base, so it fits the sockets already installed in your home or building — no shade clearance surprises, no odd proportions in an exposed fixture. The lamp measures
2.38 in. maximum overall diameter (M.O.D.) and
4.3 in. maximum overall length (M.O.L.), the same footprint people expect from a standard
household LED bulb. It carries a wide operating temperature range of
-40˚C to +40˚C, which matters in unheated garages, cold porches and three-season rooms where Canadian temperatures swing hard.
Light quality you can live withAt
3000K, the light is a warm white that reads as friendly rather than clinical — ideal for living rooms, bedrooms, dining areas and hospitality spaces.
760 initial lumens from only
8.5 W delivers useful brightness for general room lighting, and the
220° beam angle throws light sideways and downward so lampshades glow evenly and ceiling fixtures wash the whole space. A
CRI of 80+ keeps reds, wood grain and skin tones looking natural, which is exactly what you want over a dining table, in a bathroom mirror fixture or in a retail display.
Technical specificationsModel: PV-A19/S3/8.5W/30
Ordering code: 1732227
Wattage: 8.5 W
Base: E26
Voltage: 120 V
Initial lumens: 760 lm
CCT: 3000 K
CRI: 80
Beam angle: 220°
Average life: 15,000 hours
Enclosed fixture application: Yes
Damp location: Yes
M.O.D.: 2.38 in.
M.O.L.: 4.3 in.
Dimming: Non dimmable
Operating temperature: -40˚C ~ +40˚C
Listing: cETLus listed
Warranty: 2-year limited
Case quantity: 48
Electrical and installation notesThis is a line-voltage lamp for standard
120 V circuits — turn the power off at the switch, thread it in hand-tight and you're done. One important detail before you order: the bulb is
non dimmable, so pair it with a standard on/off switch rather than a dimmer, and if a circuit currently runs through a dimmer, swap the control or choose a dimmable lamp for that room. It is approved for
enclosed fixture application, meaning it can safely go inside closed-glass ceiling domes, jelly-jar fixtures and lantern housings where heat builds up. Its
damp location rating also allows use in bathrooms, covered porches, soffits and basements — protected from direct rain, but fine with humidity.
Where to use it, and the rest of the familyThink whole-building relamping: apartment corridors, stairwell fixtures, motel rooms, restaurant pendants, office lamps, clinic waiting rooms, cottage bedrooms. The
cETLus listing and
2-year limited warranty give property managers and electricians the paperwork they need, while the
15,000-hour rating reduces maintenance calls. Keep the whole project consistent by mixing colour temperatures room by room with
Pure Vision A19 S3 8.5W 2700K,
Pure Vision A19 S3 8.5W 4000K or
Pure Vision A19 S3 8.5W 5000K — same body, same output, different mood. The full
technical spec sheet for this
A19 LED bulb is available in the Documentation tab for specifications, submittals and the dimensional drawing.