INSTALLATION PLATE SUITABLE FOR CL-DL5-R-20W AND CL-BF1-R3509-3CCT

Name: INSTALLATION PLATE SUITABLE FOR CL-DL5-R-20W AND CL-BF1-R3509-3CCT
Brand: CANOLIGHT
SKU: CL-IPL-DL5-R20-BF1-R9
Price: 3.97 CAD
Availability: InStock

SKU: CL-IPL-DL5-R20-BF1 R9

Brand: CANOLIGHT

Some accessories are small, but they decide whether an installation looks sharp or sloppy — and this is one of them. The Canolight flat installation plate is the dedicated mounting base for two Canolight fixtures: the CL-DL5-R-20W anti-glare recessed downlight and the CL-BF1-R3509-3CCT baffle LED panel. Contractors also call it a mounting plate, a fixture plate or simply a pot light plate, and it does exactly what its name promises: it gives your luminaire a solid, perfectly aligned surface to sit on, whether you are wiring a brand-new ceiling or upgrading an existing one.

This is a purpose-built LED fixture accessory, not a universal bracket bent into shape on site. Its flat, low-profile design lets the luminaire sit flush against the surface, so there are no gaps, no tilt and no shadow lines around the trim once the job is done. Because the plate is machined to match the CL-DL5-R-20W and the CL-BF1-R3509-3CCT exactly, the fixture is held firmly in place without shifting, vibration or stress on the housing over the years. For installers, that means fewer shims, fewer callbacks and a repeatable result from the first unit to the last one on the floor plan. The SKU to order is CL-IPL-DL5-R20-BF1 R9.

Use it anywhere those two Canolight fixtures go: hallways, kitchens, basements and bedrooms in residential work, plus offices, clinics, retail counters, corridors and small commercial spaces. It is equally at home in new construction and in retrofit projects where a clean, professional ceiling matters, and it stands up to the reality of Canadian job sites where time on a ladder is money. Pair it with the 3.5 inches round baffle light, the CL-DL5-R-20W anti-glare recessed downlight in black or the CL-DL5-R-20W anti-glare recessed downlight in white, and order one plate per fixture so your crew never runs short mid-install.

Built for one job, and it does it well
The Canolight CL-IPL-DL5-R20-BF1 R9 is a flat installation plate designed as the mounting base for compatible Canolight luminaires. Rather than a generic bracket you have to bend, drill or improvise, it is produced to the exact tolerances of the fixtures it serves, so the luminaire drops into position and stays there. Its flat, low-profile geometry is the key detail: it keeps the fixture body tight to the mounting surface, which removes the small gaps and slight angles that make an otherwise good ceiling look unfinished.

Compatibility — exactly what it fits
This plate is engineered for two Canolight products and no others: the CL-DL5-R-20W anti-glare recessed downlight and the CL-BF1-R3509-3CCT baffle light, a model whose 3CCT designation means three selectable colour temperatures chosen right on the fixture. In the catalogue that translates to the CL-DL5-R-20W-36D-5CCT-BL downlight, the CL-DL5-R-20W-36D-5CCT-WH downlight and the CL-BF1-R3509-3CCT baffle light. Always confirm the fixture model code before ordering, since a mounting plate built for one housing family will not serve another.

Installation and site practice
Plan one plate per luminaire and lay them out with the rest of your rough-in hardware before the fixtures come out of their boxes. Position the plate first, secure it to the structure, then bring the luminaire in and let the plate carry the alignment for you — that single habit is what keeps a row of recessed downlights visually straight across a hallway or a kitchen island. Because no custom fitting is required, the plate cuts the fiddly minutes out of each location, which adds up quickly on a multi-unit or multi-room project. All electrical connections must of course follow the instructions supplied with the luminaire itself and the applicable Canadian electrical code, and the work should be carried out by a qualified electrician.

Where it earns its keep
Think of the projects where the ceiling is part of the design: a renovated basement with a long run of pot lights, a condo kitchen, a dental clinic corridor, a boutique fitting room, an office refresh where the client notices every misaligned trim. In new construction the plate is set during rough-in; in retrofit work it gives you a clean, stable base in ceilings that have already seen a few generations of fixtures. It is an accessory electrical contractors and lighting specifiers reach for across Canada precisely because it turns a variable step into a predictable one.

Ordering and documentation
Order under SKU CL-IPL-DL5-R20-BF1 R9 from Canolight, and match the quantity to the number of CL-DL5-R-20W or CL-BF1-R3509-3CCT fixtures on your plan. For full photometric and electrical values, refer to the documentation of the luminaire you are pairing it with — those fixture pages carry the wattage, lumen output, beam angle and colour temperature details you need to finalize your layout. When you combine the matched fixture with this installation plate, you get a complete, cohesive assembly and a result that looks intentional from the very first install.