INSTALLATION PLATE FOR CL-DL3 SERIES 3INCH CALL OFFICE FOR MORE DETAILS

Name: INSTALLATION PLATE FOR CL-DL3 SERIES 3INCH CALL OFFICE FOR MORE DETAILS
Brand: CANOLIGHT
SKU: CL-DL3-3-IPL
Price: 3.97 CAD
Availability: InStock

SKU: CL-DL3-3-IPL

Brand: CANOLIGHT

Nothing ruins a beautiful ceiling faster than a ragged hole around a brand-new pot light. The CANOLIGHT CL-DL3-3-IPL is the purpose-built installation plate — also called a mounting plate, adapter plate or rough-in plate — made exclusively for the CL-DL3 Series 3-inch recessed LED downlight family. If you are installing Canolight 3-inch recessed LED pot lights in a new ceiling, a retrofit, a soffit or a covered outdoor area, this is the manufacturer-matched hardware that holds everything square, tight and level.

This is an accessory, not a luminaire, so what matters is fit and finish rather than lumens and kelvins. The plate is built to the exact dimensions of the CL-DL3 Series 3-inch housing, which means no gaps, no rocking fixture, no shimming with whatever is left in the van. It creates a proper mechanical connection between the downlight and the ceiling or mounting surface, keeps the trim sitting flush, and covers openings that were cut a little generously — a common reality in renovation work. Because it is an OEM-matched component from CANOLIGHT, every fixture on the job lines up the same way, which is exactly what you want when a hallway or a soffit has a long row of lights that will be looked at end-on. Order it as SKU CL-DL3-3-IPL so the right part shows up with the right downlights.

Contractors use this plate anywhere the CL-DL3 3-inch LED downlight goes: condo and home renovations, kitchens and hallways, office lighting and small retail build-outs, hospitality corridors, and landscape and architectural projects where compact recessed fixtures tuck into soffits, overhangs and covered ceilings. In Canadian retrofits, old openings rarely match new fixture cut-outs, and this plate is the quiet fix that saves a service call. Important: it fits the Canolight CL-DL3 Series 3-inch family only — it is not a universal plate. For quantities, lead times and project-specific compatibility questions, call the office before you order, and add one plate to your bill of materials for every 3-inch downlight on the plan.

Built for one job, done properly
The CL-DL3-3-IPL is a dedicated installation plate for the CANOLIGHT CL-DL3 Series 3-inch recessed LED downlight. Unlike generic mounting hardware, it is dimensioned around this specific housing, so the fixture seats in one position and stays there. That precision is what keeps a row of small-aperture LED pot lights looking like a straight line instead of a series of near-misses, and it is why manufacturer-matched accessories belong in the same box as the luminaires.

What it does on site
The plate gives you a solid mechanical anchor for the downlight and a clean visual edge where the fixture meets the ceiling. It prevents the three classic problems installers complain about: visible gaps around the aperture, a trim that sits proud or tilted, and a fixture that shifts when someone bumps it. In retrofit work it also covers and tidies an existing opening that is slightly larger or slightly out of round, so you are not patching, sanding and repainting around a fixture you just installed.

Technical specifications
SKU: CL-DL3-3-IPL
Brand: CANOLIGHT
Type: Installation plate (accessory / mounting hardware)
Compatibility: CL-DL3 Series 3-inch recessed LED downlight family
Application: New construction, renovation and retrofit installations
Because this is an accessory rather than a light source, it carries no wattage, lumen or colour temperature rating of its own — the performance you see comes from the CL-DL3 3-inch downlight it supports. No spec sheet, IES file or installation video is posted on this page; call the office for detailed technical documentation, ordering quantities, lead times and project compatibility.

Installation notes
Plan one plate per downlight and stage them with the fixtures before the ceiling crew starts. Confirm the opening size against the CL-DL3 Series 3-inch requirements, make sure the surface behind the plate is sound — drywall, plywood soffit, or a suitable mounting substrate — and fasten it flat so the trim can close against it evenly. All wiring and fixture connections follow the instructions supplied with the downlight itself and the Canadian Electrical Code; as always, electrical work should be completed by a qualified electrician, and outdoor or covered-ceiling locations must respect the rating of the luminaire being installed.

Where it earns its keep
Think of the projects where 3-inch apertures are chosen on purpose: a condo kitchen where a larger trim would look heavy, a hotel corridor with a tight ceiling grid, a boutique or clinic reception that wants light without visual clutter, a home office lighting layout, or a residential soffit and covered entry where compact recessed fixtures disappear into the architecture. In every one of those, the plate is invisible in the finished result — which is exactly the point. Specifiers and facility managers should list the CL-DL3-3-IPL alongside the downlights on the bill of materials so installations stay uniform across every floor, unit and building in the portfolio.