JUNCTION BOX RIGID PVC

Name: JUNCTION BOX RIGID PVC
Brand: LEDCO
SKU: LCJUNCBOX-PVC-12126
Price: 441.97 CAD
Availability: InStock

SKU: LCJUNCBOX-PVC-12126

Brand: LEDCO

Some parts of a job never show, and that's exactly why they have to be done right. This PVC rigid junction box — what most people call an electrical junction box, a splice box or simply a wiring box — is the enclosure you reach for when conductors need to be joined, pulled or terminated and the finished result has to stay safe for decades. It houses splices, serves as a pull point on a long run, and protects device terminations behind a cover you can remove any time. If you've been searching for an electrical box for light fixture connections, a surface enclosure for a shop circuit, or a clean way to land cables in a damp room, this is the practical, no-nonsense answer.

The moulded rigid PVC housing is what sets it apart. It resists moisture, corrosion and many common chemicals, so it won't rust, pit or leave stains running down a painted wall the way a deteriorating metal box eventually does. The body is non-conductive, which means the enclosure itself doesn't need to be bonded — one less step on installation day. Walls are thick enough to hold fasteners securely while staying easy to work: cut, drill or saw your own openings on site so the box matches your actual conduit or cable entries instead of forcing you to work around fixed knockouts. The removable cover gives fast access for inspection, troubleshooting or a future circuit change, and the box is offered in several sizes so you can match fill and wiring needs rather than over- or under-sizing. This model is SKU LCJUNCBOX-PVC-12126.

It's a natural fit for damp basements, garages, workshops, mechanical and utility rooms, storage buildings, warehouses, small commercial interiors, and the agricultural and industrial spaces across Canada where humidity, wash-downs and road salt are hard on metal. It pairs naturally with PVC conduit systems and works alongside standard connectors and fittings. Need a different enclosure for the same project? Have a look at the metal junction box, the waterproof outdoor junction box IP68 for exposed locations, or other sizes in the same PVC family such as the PVC rigid junction box LCJUNCBOX-PVC-12124. Add it to your next order and wire with confidence.

Built for real job sites
A junction box earns its keep years after the drywall goes up, when someone opens the cover to trace a circuit. This rigid PVC junction box is built as a durable enclosure for splices, pull points and device terminations, with a moulded housing that shrugs off moisture, corrosion and many common chemicals. In damp basements, service corridors, barns and process areas, steel boxes eventually stain, seize or corrode at the entries — PVC simply doesn't go down that road. The result is an electrical junction box that still looks and works like new long after installation, with no rust bleeding onto adjacent finishes.

Non-conductive and easy to work
Because the body is non-conductive, the enclosure itself doesn't require bonding, which simplifies both the install and the inspection. The walls are thick enough to hold screws and fasteners securely, yet forgiving enough to cut, drill or saw on site. That flexibility matters: you place your conduit and cable entries exactly where the run demands, not where a manufacturer punched a knockout. Drill openings slightly undersized and dress the edges so connectors seat tight and square — a two-minute habit that keeps the assembly neat and the entries secure.

Installation and code
Mount the box on a flat, solid surface so the housing sits fully supported and the cover closes evenly. Keep entries on the lower or side faces wherever water could run down a wall, so nothing tracks into the enclosure. Before you fasten the cover, confirm that every conductor and connector sits comfortably inside without crowding — respect box fill and give yourself room for the next technician. The removable cover means inspection, troubleshooting or adding a future circuit takes seconds. As always, follow local electrical code and have the work inspected where required.

Technical specifications
SKU: LCJUNCBOX-PVC-12126
Type: Rigid PVC junction box
Housing: Moulded PVC, non-conductive
Resistance: Moisture, many common chemicals, corrosion
Cover: Removable
Entries: Field-made — cut, drill or saw on site
Mounting: Surface mount on a flat, solid surface
Category: Electrical Boxes

Where it works best and what it pairs with
Choose it for surface-mounted runs in garages, workshops, mechanical and utility rooms, storage buildings, warehouses and small commercial interiors — a splice point above a workbench, a pull box halfway along a warehouse wall, a termination for an electrical box for light fixture feed in a damp storage room. It pairs naturally with PVC conduit systems and works alongside standard connectors and fittings, and several sizes are available to match different fill and wiring needs. For a steel enclosure, see the metal junction box; for fully exposed outdoor locations, the waterproof outdoor junction box IP68; and for other formats in the same PVC line, the PVC rigid junction box LCJUNCBOX-PVC-552 or the PVC rigid junction box LCJUNCBOX-PVC-12124. No additional documents are posted for this model; the Documentation tab will show any files as they become available.