CCT LED Strips

CCT LED strips let you adjust the colour temperature of your lighting from warm to cool, all from a single fixture. Instead of being locked into one shade of white, you can fine-tune the ambiance to match the time of day, the activity, or the mood of a room. This flexibility makes them a favourite for both designers and homeowners who want one product that adapts to many situations.

Types and options

Tunable CCT strips blend two diode sets (typically warm and cool white) so you can dial in anything from a cozy 2700K glow to a crisp 6500K daylight. Dim-to-warm strips mimic the behaviour of incandescent bulbs, shifting toward a warmer tone as you dim them down. COB CCT tape uses a dense chip-on-board layout for a smooth, dotless line of light with adjustable temperature. There are also field-selectable strip fixtures with switchable power output and multiple CCT presets (3000K, 4000K, 5000K, 5700K, 6500K) built right in.

Where to use them

In residential spaces, CCT strips shine under kitchen cabinets, in cove lighting, behind headboards, and in bathrooms where you want warm light at night and bright light in the morning. In commercial settings, they suit retail displays, offices, hospitality, and architectural accents. High-voltage selectable fixtures (AC120–347V) are well suited to warehouses, parking structures, and other utility spaces.

How to choose

Start with voltage: low-voltage strips (typically 24V) need a compatible driver, while high-voltage models connect directly to line power. Check the CCT range to confirm it covers the tones you need. Look at the CRI (a CRI of 90+ renders colours more naturally) and the output in watts per metre or per foot. Finally, match the IP rating to the environment — a higher IP value is better for damp or exposed areas.

FAQ

What is the difference between CCT and dim-to-warm? CCT lets you choose any temperature independently of brightness, while dim-to-warm automatically warms the light as you lower the dimmer.

Do I need a special controller? Tunable CCT strips usually require a controller or driver that supports two channels; field-selectable fixtures often have the presets built in.

Can I cut these strips? Most flexible strips have marked cut points; always cut on the line and respect the maximum run length for the chosen voltage.