SAFETY WIRE FOR LL1 SERIES LINEAR LIGHTS 8.2FT 2PCS PER SET

Name: SAFETY WIRE FOR LL1 SERIES LINEAR LIGHTS 8.2FT 2PCS PER SET
Brand: CANOLIGHT
SKU: CL-LL1A-Safety-wire-2.5
Price: 21.97 CAD
Availability: InStock

SKU: CL-LL1A-Safety wire 2.5

Brand: CANOLIGHT

Hanging a linear fixture is only half the job — securing it is the other half, and that's exactly what this safety wire set is built for. The Canolight CL-LL1A safety wire, also searched as a suspension cable, safety cable kit, aircraft-style hanging wire or linear light accessory, is a dedicated secondary support made for the LL1 series linear LED light fixtures. Each set contains 2 individual wires, the standard quantity used for one suspended linear luminaire, so ordering is simple: one set per fixture, more sets for multi-fixture runs. It's the small part that keeps a big installation honest, whether you're hanging LED linear lighting over a row of desks, a retail aisle or a warehouse workstation.

Every wire measures 8.2 feet (2.5 metres), giving you plenty of reach to drop a fixture from deck or ceiling structure down to the mounting height you want, then trim or coil the excess. That generous length makes the same safety wire kit work for a low office ceiling or a taller open-plenum space, which is a real advantage on retrofits where ceiling heights change from room to room. The set is manufacturer-matched to the LL1 housing profile and its mounting points, so the wires line up with the fixture's own suspension provisions instead of fighting them — no improvised hardware, no drilling extra holes, no compromised look once the ceiling grid goes back up. The SKU to quote on your order is CL-LL1A-Safety wire 2.5, from Canolight.

Secondary suspension is increasingly expected on Canadian job sites for pendant and surface-mounted linear fixtures in commercial, institutional and industrial settings — offices, retail spaces, warehouses, schools and healthcare facilities all fall into that category. Using the OEM accessory rather than generic cable keeps your installation consistent with the fixture manufacturer's intent and avoids questions during inspection. Installers like it because it goes up fast: clip, drop, level, done, with far less time spent hunting for hardware in the van. If your project includes LL1 series linear lights, add one of these 2-piece sets for every luminaire and give every run the backup support it deserves. Order your Canolight safety wires today and hang with confidence.

What this accessory is
The CL-LL1A safety wire is a suspension accessory — not a light, but the piece that makes suspending a light safe and repeatable. It is engineered specifically for the LL1 series linear LED fixtures, so its length, attachment style and interface with the luminaire's mounting points are all matched to that housing. Each kit contains 2 wires, which is the quantity normally used per linear luminaire: one near each end of the fixture, so the load is shared and the fixture stays level. Because the wires are supplied as a matched set, you don't have to mix and match cable, grips and anchors from different sources and hope everything lines up.

Technical specifications
SKU: CL-LL1A-Safety wire 2.5
Brand: CANOLIGHT
Type: Safety wire / secondary suspension accessory
Compatible with: LL1 series linear LED light fixtures
Length: 8.2 ft (2.5 m) per wire
Quantity: 2 pieces per set
Category: Linear accessories

Installation and on-site practice
Planning is straightforward: count your LL1 linear fixtures, order the same number of 2-piece sets, and you're covered. With 8.2 feet of wire on hand, you can drop from structure, bar joist, concrete deck or T-bar support down to your intended mounting height and still have slack to adjust, which is handy when a run has to be levelled across an uneven ceiling. Set both wires at the same drop before energizing anything, verify the fixture sits true along its length, and confirm your anchors are landed in solid structure rather than in the ceiling tile or grid alone. On continuous runs, keeping the wire drops consistent from luminaire to luminaire is what makes a long line of LED linear lighting look like one clean, uninterrupted line rather than a series of separate fixtures.

Why the manufacturer's accessory matters
Secondary suspension is a safety item, and safety items are the wrong place to improvise. Generic or mismatched hanging hardware can interfere with the housing profile, sit awkwardly at the mounting points, or simply not be intended for the fixture it's holding — and that can put a manufacturer's warranty in question. Choosing the Canolight safety wire made for the LL1 keeps the whole assembly within the manufacturer's specification: right fixture, right accessory, right documentation. For contractors, that's one less item to justify on a walkthrough, and one less callback if a ceiling is ever opened up again years later.

Applications and documentation
These wire sets follow the LL1 wherever it goes: open-plan office lighting above workstations and meeting rooms, retail sales floors and back-of-house areas, warehouses and light industrial bays, school corridors, gyms and classrooms, plus clinics and healthcare facilities where fixtures must stay firmly supported in high-traffic spaces. They suit both new construction and retrofit work, and multiple sets can be ordered to match the exact fixture count on larger projects. A technical PDF spec sheet for the CL-LL1A-Safety wire 2.5 is available in the Documentation tab of this page — download it for your submittal package, your installation binder or your inspector, and keep the paperwork as tidy as the ceiling.

Technical Files