120-DEGREE CONNECTOR FOR LL1 LINEAR LIGHTS WHITE

Name: 120-DEGREE CONNECTOR FOR LL1 LINEAR LIGHTS WHITE
Brand: CANOLIGHT
SKU: CL-LL1A-V120-corner-WH
Price: 59.97 CAD
Availability: InStock

SKU: CL-LL1A-V120 corner-WH

Brand: CANOLIGHT

Some lighting plans refuse to run in a straight line — and that's exactly where this piece earns its keep. The CANOLIGHT CL-LL1A-V120 corner-WH is a 120-degree angled connector made specifically for the LL1 linear LED lighting series. Call it a corner connector, an angle connector, a linear light connector or simply the "120-degree elbow" — it's the part that lets you turn a simple straight run into hexagons, angled ceiling grids, chevrons, honeycomb canopies and custom architectural shapes without improvising on site. If you've ever searched for an L shape connector for a linear fixture and settled for something that almost fit, this is the purpose-built alternative: one precise angle, one clean junction, every single time.

This connector locks in an exact 120-degree angle between two LL1 segments, keeping the fixtures aligned with no gaps, no twisting and no electrical inconsistency at the joint. The white finish is colour-matched to the LL1 linear light housing, so the corner disappears into the run instead of announcing itself — no mismatched grey plastic, no visible break in the light line. It's engineered for a tool-free, snap-fit connection, which means a solid mechanical and electrical bond in seconds, whether your LL1 fixtures are surface-mounted to the ceiling or suspended on aircraft cable. The precision fit also keeps connections tight over the long haul, so a busy commercial room won't develop a flickering corner two years down the road.

Retail floors, showrooms, offices, boardrooms, clinics, restaurants, gyms, garages and lobbies — anywhere an LL1 run needs to change direction, this is the piece that makes the geometry work. It's a favourite of Canadian contractors building angled feature ceilings, because the layout math stays predictable and nothing has to be cut, drilled or forced. Important: the CL-LL1A-V120 corner-WH is designed and tested exclusively for the CANOLIGHT LL1 linear LED series — using matched components keeps the system performing as intended instead of gambling on a third-party part. Planning a hexagonal canopy or an angled grid? Count your junctions, order one connector per corner, and build the shape you actually drew.

Compatible with
Works with:
Fixture: CL-LL1-225-3CCT-BL, CL-LL1-225-3CCT-WH, CL-LL1-450-3CCT-BL, CL-LL1-450-3CCT-WH, CL-LL1-8100-3CCT-BL, CL-LL1-8100-3CCT-WH

Built for one job, and it does it perfectly
The CANOLIGHT CL-LL1A-V120 corner-WH is an accessory, not a fixture — and that focus is the point. It is a 120-degree angled connector manufactured specifically as part of the LL1 linear LED light ecosystem, so its geometry, its housing profile and its internal contacts are matched to the LL1 fixture body. The result is a junction that behaves like a continuous piece of the run rather than a patched-together joint. No shims, no tape, no drilling a second mounting hole to hide a misalignment.

Finish and appearance
The connector is supplied in a white finish chosen to match the LL1 linear light housing. On a white ceiling or against a white suspended run, the corner blends into the fixture line and the eye simply follows the light. That matters most on exposed architectural installations — open-ceiling retail, showrooms, modern offices — where every visible component is part of the design. A colour-matched corner keeps the installation reading as one deliberate shape instead of a collection of parts.

Installation and electrical connection
Installation is tool-free: the connector uses a snap-fit engagement that creates both the mechanical hold and the electrical continuity between two LL1 segments in one motion. For a contractor on a lift, in a ceiling grid or working in a tight service corridor, that's minutes saved at every junction and one less small part to drop. Because the fit is precise rather than approximate, the joint resists the slow loosening that causes flicker or dead sections in high-traffic commercial spaces. Plan your layout first, count one connector per 120-degree corner, and dry-fit the shape on the floor before you lift anything — hexagons and triangles are far easier to verify at waist height.

Compatibility — read this before you order
This connector fits the CANOLIGHT LL1 linear light series and nothing else. It is designed and tested as part of that system, which is exactly why it eliminates the compatibility headaches that come with generic corner pieces: inconsistent contact, mechanical play, or a corner that sits a few degrees off and throws the whole geometry out by the time you reach the far wall. If your run needs a different angle or a straight-line splice, choose the corresponding LL1 accessory rather than forcing this one.

Technical specifications
SKU: CL-LL1A-V120 corner-WH
Brand: CANOLIGHT
Type: 120-degree angled connector
Compatibility: CANOLIGHT LL1 linear LED light series
Finish: White, colour-matched to the LL1 housing
Connection: Tool-free snap-fit, mechanical and electrical
Mounting configurations supported: Surface-mounted and suspended LL1 runs
Category: Linear accessories

Documentation
The technical PDF, the CL-LL1A-V120 corner-WH spec sheet, is available in the Documentation tab of this page — worth a quick look before you finalize a layout with multiple corners, especially on a large commercial rollout where junction count drives the whole order.

Technical Files