A purpose-built accessory, not a workaround
The LS-AC-S Linear Strip Suspension Kit belongs to ARANI's family of accessories for linear lighting, alongside connector and vapour-tight suspension parts. Its job is simple and specific: give a linear fixture 2 clean suspension points so it hangs level, stays level, and looks intentional. That matters more than it sounds. Field-improvised hanging — chain from a strut, random jack chain, mismatched hooks — is what makes a straight run of LED strip lighting look crooked from the floor, and what makes a maintenance visit take twice as long. A matched kit keeps every fixture in a row at the same height and the same orientation.
Compatibility
According to the ARANI accessory chart, the LS-AC-S is designed for LED linear strips and wraparound luminaires. The same chart lists a separate connector accessory used to join two 4 ft fixtures into a single 8 ft luminaire, and a distinct suspension accessory intended for vapour-tight LED fixtures — so if your project is a wet or washdown area, confirm you're specifying the right part for that fixture type rather than assuming one kit covers everything. For standard indoor strip and wrap fixtures, LS-AC-S is the one to quote.
Technical specifications
Order code: LS-AC-S
Brand: ARANI
Type: Suspension kit for linear lighting
Suspension points: 2
Compatible with: LED linear strips and wraparound luminaires
Installation and planning
Plan one kit per fixture to be suspended, and work out your mounting height before you start: suspended linear LED lighting is usually dropped to bring light closer to the task plane in high-ceiling rooms, or to clear ductwork, sprinkler lines and open joists. Anchor each of the two points into structure — joist, beam, strut channel or approved ceiling anchor — never into drywall alone, and keep both points equidistant from the fixture ends so the unit balances. Route the supply whip so it doesn't take the fixture's weight, and dress the slack neatly; the minimal hardware profile only pays off visually if the wiring is tucked in. All electrical connections must be made by a qualified person and in accordance with the Canadian Electrical Code and local requirements.
Where it's used and what's documented
Contractors reach for this kit in warehouses, garages and service bays, retail back-of-house, gyms, corridors, classrooms, workshops and open-plan offices — anywhere a row of 4 ft or 8 ft LED strip lights or wraps needs to hang instead of sit tight to the deck. It's equally handy in a residential basement or garage renovation where the joists are exposed and a suspended run gives better, more even coverage over a workbench or vehicle bay. The LS-AC-S spec sheet is available in the Documentation tab of this page: it shows the accessory ordering guide and the compatibility chart, which is the fastest way to confirm you're pairing the right accessory with the right luminaire before you submit your order.
